Pro Meter

Air-Powered, Bench-Top, Two-Part Dispensing System

Pro Meter benchtop metering and mixing pump for two-part resins

Standard Horizontal Machine

Output adjustable from slow and gentle to 1 gallon per minute!
Easy slide ratio adjustment, ratios from 6:100 to 1:1
Will dispense out of 2.5 or 7 gallon standard reservoirs, vacuum degassing reservoirs, or 55 gallon drums!
Delivers accurately metered material through a static mix head.
Most options can be shipped off the shelf!
Will handle abrasive materials
Will pump a broad range of viscosities from water-thin to flowable paste

Pro Meter dimensions

Pro Meter Dimensions

Pro Meter benchtop metering and mixing pump for two-part resins

Vertical Machine for Moisture-Sensitive Materials

Desiccant Tubes protect materials from atmospheric moisture.
Solvent cup on pump improves seal life and reduces down-time
Precise piston type pumps handle high or low viscosity materials

Vertical Pro Meter dimensions

Vertical Pro Meter Dimensions

Various Options:

Do not hesitate to call our experts to find the best set of pump options for your project!

Electronic Shot Size Control

For measuring exact shot size.

Vacuum Degassing

For removing dissolved gas from materials where bubble-free dispensing is critical

Desiccant Tubes

For moisture-sensitive materials.

Material agitators

For preventing settling of filled materials.

Carts and Racks

For ease of use.

Snuffback Dispensing guns

For controlled dispense of your mixed product.

Nitrogen Blanket System

For protecting extremely moisture-sensitive materials.

Static Mixers

For mixing 2-part materials.

Laminating Roller

For dispensing epoxy onto your large, wet lay-ups.

Spraying System

For uniformly spraying your material onto any surface.

Rotary Table

For dispensing materials on circles from 24mm to 155mm in diameter.

Pro Meter Literature